As you know, i’m doing some tests with that hardware, and these days i had some troubles mapping SAN disks for it…
But Solaris has a lot of tools to debug and fix that kind of problems. The first command i did use was:

# fcinfo hba-port
HBA Port WWN: xxxx…
…
HBA Port WWN: xxxx…
…

Wich shows how many HBAs we have on the system, and the WWNs.
ps.: Actually, the first command was “format “, but just the local disc was showed, and i was looking for three other discs…
Let’s try another one:

fcinfo remote-port -p WWN-goes-here -s

It was not showing anything… Houston, we have a problem.
So, first i did try the command:

cfgadm -o show_FCP_dev -al
Ap_Id Type Receptacle Occupant Condition
c1 fc-fabric connected unconfigured unknown
c2 fc-fabric connected unconfigured unknown

Ok, it’s clear that both are unconfigured. So the next step was test the connection state:

# luxadm -e port
/devices/pci@0,0/pci8086,25e5@5/pci103c,1705@0/fp@0,0:devctl NOT CONNECTED
/devices/pci@0,0/pci8086,25e5@5/pci103c,1705@0,1/fp@0,0:devctl NOT CONNECTED

As you can see in the above command output, there are two HBA, but no one is “CONNECTED”. I’m not an expert, but i did need to use the “-e” (expert option from the manual :), for luxadm to force the link to reinitialize ( LIP/Loop Initialization Primitive):

# luxadm -e forcelip /devices/pci@0,0/pci8086,25e5@5\
/pci103c,1705@0/fp@0,0:devctl

After a few seconds…

# luxadm -e port
/devices/pci@0,0/pci8086,25e5@5/pci103c,1705@0/fp@0,0:devctl CONNECTED
/devices/pci@0,0/pci8086,25e5@5/pci103c,1705@0,1/fp@0,0:devctl NOT CONNECTED